[PATCH 00/41] Documentation: fix spelling mistakes

classic Classic list List threaded Threaded
93 messages Options
12345
Reply | Threaded
Open this post in threaded view
|

[PATCH 33/41] Documentation: RCU: fix spelling mistake

Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/RCU/stallwarn.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index 0f7fb42..e93d041 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -49,7 +49,7 @@ rcupdate.rcu_task_stall_timeout
  This boot/sysfs parameter controls the RCU-tasks stall warning
  interval.  A value of zero or less suppresses RCU-tasks stall
  warnings.  A positive value sets the stall-warning interval
- in jiffies.  An RCU-tasks stall warning starts wtih the line:
+ in jiffies.  An RCU-tasks stall warning starts with the line:
 
  INFO: rcu_tasks detected stalls on tasks:
 
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 34/41] Documentation: robust-futexes: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/robust-futexes.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/robust-futexes.txt b/Documentation/robust-futexes.txt
index af6fce2..61c22d6 100644
--- a/Documentation/robust-futexes.txt
+++ b/Documentation/robust-futexes.txt
@@ -126,9 +126,9 @@ vma based method:
 
  - no VM changes are needed - 'struct address_space' is left alone.
 
- - no registration of individual locks is needed: robust mutexes dont
+ - no registration of individual locks is needed: robust mutexes don't
    need any extra per-lock syscalls. Robust mutexes thus become a very
-   lightweight primitive - so they dont force the application designer
+   lightweight primitive - so they don't force the application designer
    to do a hard choice between performance and robustness - robust
    mutexes are just as fast.
 
@@ -202,7 +202,7 @@ and the remaining bits are for the TID.
 Testing, architecture support
 -----------------------------
 
-i've tested the new syscalls on x86 and x86_64, and have made sure the
+I've tested the new syscalls on x86 and x86_64, and have made sure the
 parsing of the userspace list is robust [ ;-) ] even if the list is
 deliberately corrupted.
 
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 35/41] Documentation: scsi: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/scsi/ChangeLog.megaraid_sas | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 18b5709..20dcf20 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -63,7 +63,7 @@ Release Date    : Sat. Feb 9, 2013 17:00:00 PST 2013 -
 Current Version : 06.506.00.00-rc1
 Old Version     : 06.504.01.00-rc1
     1. Add 4k FastPath DIF support.
-    2. Dont load DevHandle unless FastPath enabled.
+    2. Don't load DevHandle unless FastPath enabled.
     3. Version and Changelog update.
 -------------------------------------------------------------------------------
 Release Date    : Mon. Oct 1, 2012 17:00:00 PST 2012 -
@@ -105,7 +105,7 @@ Old Version     : 00.00.06.12-rc1
     1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380.
     2. Mask off flags in ioctl path to prevent memory scribble with older
        MegaCLI versions.
-    3. Remove poll_mode_io module paramater, sysfs node, and associated code.
+    3. Remove poll_mode_io module parameter, sysfs node, and associated code.
 -------------------------------------------------------------------------------
 Release Date    : Wed. Oct 5, 2011 17:00:00 PST 2010 -
  (emaild-id:[hidden email])
@@ -199,7 +199,7 @@ Old Version     : 00.00.04.31-rc1
 1. Add the Online Controller Reset (OCR) to the Driver.
  OCR is the new feature for megaraid_sas driver which
  will allow the fw to do the chip reset which will not
- affact the OS behavious.
+ affect the OS behavior.
 
  To add the OCR support, driver need to do:
  a). reset the controller chips -- Xscale and Gen2 which
@@ -233,7 +233,7 @@ Old Version     : 00.00.04.31-rc1
  failed state.  Driver will kill adapter if can't bring back FW after the
  this three times reset.
 4. Add the input parameter max_sectors to 1MB support to our GEN2 controller.
- customer can use the input paramenter max_sectors to add 1MB support to GEN2
+ customer can use the input parameter max_sectors to add 1MB support to GEN2
  controller.
 
 1 Release Date    : Thur.  Oct 29, 2009 09:12:45 PST 2009 -
@@ -584,9 +584,9 @@ ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW.
 2 Current Version : 00.00.02.04
 3 Older Version   : 00.00.02.04
 
-i. Remove superflous instance_lock
+i. Remove superfluous instance_lock
 
- gets rid of the otherwise superflous instance_lock and avoids an unsave
+ gets rid of the otherwise superfluous instance_lock and avoids an unsafe
  unsynchronized access in the error handler.
 
  - Christoph Hellwig <[hidden email]>
@@ -620,7 +620,7 @@ i. Register 16 byte CDB capability with scsi midlayer
 3 Older Version   : 00.00.02.01
 
 i. New template defined to represent each family of controllers (identified by processor used).
- The template will have defintions that will be initialised to appropritae values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
+ The template will have definitions that will be initialised to appropriate values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
 
  -Sumant Patro <[hidden email]>
 
@@ -630,7 +630,7 @@ i. New template defined to represent each family of controllers (identified by p
 
 i. Code reorganized to remove code duplication in megasas_build_cmd.
 
- "There's a lot of duplicate code megasas_build_cmd.  Move that out of the different codepathes and merge the reminder of megasas_build_cmd into megasas_queue_command"
+ "There's a lot of duplicate code megasas_build_cmd.  Move that out of the different codepaths and merge the reminder of megasas_build_cmd into megasas_queue_command"
 
  - Christoph Hellwig <[hidden email]>
 
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 36/41] Documentation: sound: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/sound/alsa/compress_offload.txt | 2 +-
 Documentation/sound/alsa/soc/dapm.txt         | 2 +-
 Documentation/sound/alsa/soc/overview.txt     | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/sound/alsa/compress_offload.txt b/Documentation/sound/alsa/compress_offload.txt
index 630c492..81476b4 100644
--- a/Documentation/sound/alsa/compress_offload.txt
+++ b/Documentation/sound/alsa/compress_offload.txt
@@ -149,7 +149,7 @@ Gapless Playback
 ================
 When playing thru an album, the decoders have the ability to skip the encoder
 delay and padding and directly move from one track content to another. The end
-user can perceive this as gapless playback as we dont have silence while
+user can perceive this as gapless playback as we don't have silence while
 switching from one track to another
 
 Also, there might be low-intensity noises due to encoding. Perfect gapless is
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index 6faab48..c45bd79 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -132,7 +132,7 @@ SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0),
 SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls,
  ARRAY_SIZE(wm8731_output_mixer_controls)),
 
-If you dont want the mixer elements prefixed with the name of the mixer widget,
+If you don't want the mixer elements prefixed with the name of the mixer widget,
 you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same
 as for SND_SOC_DAPM_MIXER.
 
diff --git a/Documentation/sound/alsa/soc/overview.txt b/Documentation/sound/alsa/soc/overview.txt
index ff88f52..f3f28b7 100644
--- a/Documentation/sound/alsa/soc/overview.txt
+++ b/Documentation/sound/alsa/soc/overview.txt
@@ -63,7 +63,7 @@ multiple re-usable component drivers :-
     and any audio DSP drivers for that platform.
 
   * Machine class driver: The machine driver class acts as the glue that
-    decribes and binds the other component drivers together to form an ALSA
+    describes and binds the other component drivers together to form an ALSA
     "sound card device". It handles any machine specific controls and
     machine level audio events (e.g. turning on an amp at start of playback).
 
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 32/41] Documentation: pps: fix spelling mistake

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/pps/pps.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt
index 7cb7264..50022b3 100644
--- a/Documentation/pps/pps.txt
+++ b/Documentation/pps/pps.txt
@@ -98,7 +98,7 @@ pps_source_info_s as follows:
     };
 
 and then calling the function pps_register_source() in your
-intialization routine as follows:
+initialization routine as follows:
 
     source = pps_register_source(&pps_ktimer_info,
  PPS_CAPTUREASSERT | PPS_OFFSETASSERT);
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 31/41] Documentation: power: fix spelling mistake

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/power/opp.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
index c6279c2..1721a86 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.txt
@@ -146,7 +146,7 @@ dev_pm_opp_find_freq_exact - Search for an OPP based on an *exact* frequency and
  rcu_read_lock();
  opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false);
  rcu_read_unlock();
- /* dont operate on the pointer.. just do a sanity check.. */
+ /* don't operate on the pointer.. just do a sanity check.. */
  if (IS_ERR(opp)) {
  pr_err("frequency not disabled!\n");
  /* trigger appropriate actions.. */
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 29/41] Documentation: lzo: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/lzo.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/lzo.txt b/Documentation/lzo.txt
index ea45dd3..285c54f 100644
--- a/Documentation/lzo.txt
+++ b/Documentation/lzo.txt
@@ -69,9 +69,9 @@ Description
 
   IMPORTANT NOTE : in the code some length checks are missing because certain
   instructions are called under the assumption that a certain number of bytes
-  follow because it has already been garanteed before parsing the instructions.
+  follow because it has already been guaranteed before parsing the instructions.
   They just have to "refill" this credit if they consume extra bytes. This is
-  an implementation design choice independant on the algorithm or encoding.
+  an implementation design choice independent on the algorithm or encoding.
 
 Byte sequences
 
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 31/41] Documentation: power: fix spelling mistake

viresh kumar
In reply to this post by Eric Engestrom-2
On 25-04-16, 07:36, Eric Engestrom wrote:

> Signed-off-by: Eric Engestrom <[hidden email]>
> ---
>  Documentation/power/opp.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
> index c6279c2..1721a86 100644
> --- a/Documentation/power/opp.txt
> +++ b/Documentation/power/opp.txt
> @@ -146,7 +146,7 @@ dev_pm_opp_find_freq_exact - Search for an OPP based on an *exact* frequency and
>   rcu_read_lock();
>   opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false);
>   rcu_read_unlock();
> - /* dont operate on the pointer.. just do a sanity check.. */
> + /* don't operate on the pointer.. just do a sanity check.. */
>   if (IS_ERR(opp)) {
>   pr_err("frequency not disabled!\n");
>   /* trigger appropriate actions.. */

Acked-by: Viresh Kumar <[hidden email]>

--
viresh
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 03/41] Documentation: arm: fix spelling mistakes

Nicolas Ferre-2
In reply to this post by Eric Engestrom-2
Le 25/04/2016 02:24, Eric Engestrom a écrit :
> Signed-off-by: Eric Engestrom <[hidden email]>

Hi,

thanks for the patch:
Acked-by: Nicolas Ferre <[hidden email]>


> ---
>  Documentation/arm/Atmel/README           | 2 +-
>  Documentation/arm/keystone/knav-qmss.txt | 2 +-

So, who will take care of this patch: can you carry it with you?
Jonathan may take it?

(As is touches other document, I can't take it with the Atmel/at91
material...)

Bye,

>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/arm/Atmel/README b/Documentation/arm/Atmel/README
> index 0931cf7..adffac7 100644
> --- a/Documentation/arm/Atmel/README
> +++ b/Documentation/arm/Atmel/README
> @@ -16,7 +16,7 @@ git branches/tags and email subject always contain this "at91" sub-string.
>  
>  AT91 SoCs
>  ---------
> -Documentation and detailled datasheet for each product are available on
> +Documentation and detailed datasheet for each product are available on
>  the Atmel website: http://www.atmel.com.
>  
>    Flavors:
> diff --git a/Documentation/arm/keystone/knav-qmss.txt b/Documentation/arm/keystone/knav-qmss.txt
> index fcdb9fd..d15bf9a 100644
> --- a/Documentation/arm/keystone/knav-qmss.txt
> +++ b/Documentation/arm/keystone/knav-qmss.txt
> @@ -36,7 +36,7 @@ accumulator channels defined in DTS (example in DT documentation) to monitor
>  CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at
>   git://git.ti.com/keystone-rtos/qmss-lld.git
>  
> -k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
> +k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports up to 48 accumulator
>  channels. This firmware is available under ti-keystone folder of
>  firmware.git at
>     git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
>


--
Nicolas Ferre
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 09/41] Documentation: dt: clock: fix spelling mistakes

Heiko Stuebner
In reply to this post by Eric Engestrom-2
Am Montag, 25. April 2016, 01:24:06 schrieb Eric Engestrom:

> Signed-off-by: Eric Engestrom <[hidden email]>
> ---
>  Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt | 2 +-
>  Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt | 2 +-
>  Documentation/devicetree/bindings/clock/st/st,clkgen.txt        | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
> b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt index
> 0c2bf5e..7f36853 100644
> --- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
> @@ -16,7 +16,7 @@ Required Properties:
>  Optional Properties:
>
>  - rockchip,grf: phandle to the syscon managing the "general register files"
> -  If missing pll rates are not changable, due to the missing pll lock
> status. +  If missing pll rates are not changeable, due to the missing pll
> lock status.
>
>  Each clock is assigned an identifier and client nodes can use this
> identifier to specify the clock which they consume. All available clocks
> are defined as diff --git
> a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
> b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt index
> c9fbb76..8cb47c3 100644
> --- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
> @@ -15,7 +15,7 @@ Required Properties:
>  Optional Properties:
>
>  - rockchip,grf: phandle to the syscon managing the "general register files"
> -  If missing pll rates are not changable, due to the missing pll lock
> status. +  If missing pll rates are not changeable, due to the missing pll
> lock status.
>
>  Each clock is assigned an identifier and client nodes can use this
> identifier to specify the clock which they consume. All available clocks
> are defined as

For the Rockchip parts
Reviewed-by: Heiko Stuebner <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 03/41] Documentation: arm: fix spelling mistakes

Alexandre Belloni
In reply to this post by Eric Engestrom-2
Hi,

It is required to write a commit message.

On 25/04/2016 at 01:24:00 +0100, Eric Engestrom wrote :

> Signed-off-by: Eric Engestrom <[hidden email]>
> ---
>  Documentation/arm/Atmel/README           | 2 +-
>  Documentation/arm/keystone/knav-qmss.txt | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/arm/Atmel/README b/Documentation/arm/Atmel/README
> index 0931cf7..adffac7 100644
> --- a/Documentation/arm/Atmel/README
> +++ b/Documentation/arm/Atmel/README
> @@ -16,7 +16,7 @@ git branches/tags and email subject always contain this "at91" sub-string.
>  
>  AT91 SoCs
>  ---------
> -Documentation and detailled datasheet for each product are available on
> +Documentation and detailed datasheet for each product are available on
>  the Atmel website: http://www.atmel.com.
>  
>    Flavors:
> diff --git a/Documentation/arm/keystone/knav-qmss.txt b/Documentation/arm/keystone/knav-qmss.txt
> index fcdb9fd..d15bf9a 100644
> --- a/Documentation/arm/keystone/knav-qmss.txt
> +++ b/Documentation/arm/keystone/knav-qmss.txt
> @@ -36,7 +36,7 @@ accumulator channels defined in DTS (example in DT documentation) to monitor
>  CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at
>   git://git.ti.com/keystone-rtos/qmss-lld.git
>  
> -k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
> +k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports up to 48 accumulator
>  channels. This firmware is available under ti-keystone folder of
>  firmware.git at
>     git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
> --
> 2.8.0
>

--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 33/41] Documentation: RCU: fix spelling mistake

Josh Triplett
In reply to this post by Eric Engestrom-2
On Mon, Apr 25, 2016 at 07:36:59AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <[hidden email]>

Good catch.

Reviewed-by: Josh Triplett <[hidden email]>

> ---
>  Documentation/RCU/stallwarn.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
> index 0f7fb42..e93d041 100644
> --- a/Documentation/RCU/stallwarn.txt
> +++ b/Documentation/RCU/stallwarn.txt
> @@ -49,7 +49,7 @@ rcupdate.rcu_task_stall_timeout
>   This boot/sysfs parameter controls the RCU-tasks stall warning
>   interval.  A value of zero or less suppresses RCU-tasks stall
>   warnings.  A positive value sets the stall-warning interval
> - in jiffies.  An RCU-tasks stall warning starts wtih the line:
> + in jiffies.  An RCU-tasks stall warning starts with the line:
>  
>   INFO: rcu_tasks detected stalls on tasks:
>  
> --
> 2.8.0
>
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 36/41] Documentation: sound: fix spelling mistakes

Takashi Iwai
In reply to this post by Eric Engestrom-2
On Mon, 25 Apr 2016 08:37:02 +0200,
Eric Engestrom wrote:
>
> Signed-off-by: Eric Engestrom <[hidden email]>

Applied, thanks.


Takashi
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 07/41] Documentation: dt: arc: fix spelling mistakes

Vineet Gupta
In reply to this post by Eric Engestrom-2
On Monday 25 April 2016 05:54 AM, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <[hidden email]>

Thx Eric.

Applied to ARC for-curr !

-Vineet
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 36/41] Documentation: sound: fix spelling mistakes

Vinod Koul-3
In reply to this post by Eric Engestrom-2
On Mon, Apr 25, 2016 at 07:37:02AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <[hidden email]>
> ---
>  Documentation/sound/alsa/compress_offload.txt | 2 +-

Acked-by: Vinod Koul <[hidden email]>

Thanks
--
~Vinod
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 38/41] Documentation: virtual: fix spelling mistake

Cornelia Huck-4
In reply to this post by Eric Engestrom-2
On Mon, 25 Apr 2016 07:37:04 +0100
Eric Engestrom <[hidden email]> wrote:

> Signed-off-by: Eric Engestrom <[hidden email]>
> ---
>  Documentation/virtual/kvm/devices/s390_flic.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/virtual/kvm/devices/s390_flic.txt b/Documentation/virtual/kvm/devices/s390_flic.txt
> index e3e314c..13a1261 100644
> --- a/Documentation/virtual/kvm/devices/s390_flic.txt
> +++ b/Documentation/virtual/kvm/devices/s390_flic.txt
> @@ -68,7 +68,7 @@ struct kvm_s390_io_adapter {
>
>    KVM_DEV_FLIC_ADAPTER_MODIFY
>      Modifies attributes of an existing I/O adapter interrupt source. Takes
> -    a kvm_s390_io_adapter_req specifiying the adapter and the operation:
> +    a kvm_s390_io_adapter_req specifying the adapter and the operation:
>
>  struct kvm_s390_io_adapter_req {
>   __u32 id;

Acked-by: Cornelia Huck <[hidden email]>

Paolo/Radim, will you take this through the kvm tree directly?

Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 08/41] Documentation: dt: arm: fix spelling mistakes

Rob Herring-3
In reply to this post by Eric Engestrom-2
On Mon, Apr 25, 2016 at 01:24:05AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <[hidden email]>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/arm/cci.txt        | 2 +-
>  Documentation/devicetree/bindings/arm/spear-misc.txt | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
> index a1a5a7e..0f2153e 100644
> --- a/Documentation/devicetree/bindings/arm/cci.txt
> +++ b/Documentation/devicetree/bindings/arm/cci.txt
> @@ -100,7 +100,7 @@ specific to ARM.
>   "arm,cci-400-pmu,r0"
>   "arm,cci-400-pmu,r1"
>   "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
> -      secure acces to CCI registers
> +      secure access to CCI registers
>   "arm,cci-500-pmu,r0"
>   "arm,cci-550-pmu,r0"
>   - reg:
> diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt
> index cf64982..e404e25 100644
> --- a/Documentation/devicetree/bindings/arm/spear-misc.txt
> +++ b/Documentation/devicetree/bindings/arm/spear-misc.txt
> @@ -6,4 +6,4 @@ few properties of different peripheral controllers.
>  misc node required properties:
>  
>  - compatible Should be "st,spear1340-misc", "syscon".
> -- reg: Address range of misc space upto 8K
> +- reg: Address range of misc space up to 8K
> --
> 2.8.0
>
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 10/41] Documentation: dt: display: fix spelling mistake

Rob Herring-3
In reply to this post by Eric Engestrom-2
On Mon, Apr 25, 2016 at 01:24:07AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <[hidden email]>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
> index 22756b3..a782659 100644
> --- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
> +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
> @@ -41,7 +41,7 @@ Video interfaces:
>    endpoint node connected from mic node (reg = 0):
>      - remote-endpoint: specifies the endpoint in mic node. This node is required
>         for Exynos5433 mipi dsi. So mic can access to panel node
> -       thoughout this dsi node.
> +       throughout this dsi node.
>    endpoint node connected to panel node (reg = 1):
>      - remote-endpoint: specifies the endpoint in panel node. This node is
>         required in all kinds of exynos mipi dsi to represent
> --
> 2.8.0
>
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 11/41] Documentation: dt: dma: fix spelling mistake

Rob Herring-3
In reply to this post by Eric Engestrom-2
On Mon, Apr 25, 2016 at 01:24:08AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <[hidden email]>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
> index 2291c40..3cf0072d 100644
> --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
> +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
> @@ -7,7 +7,7 @@ Required properties:
>  - compatible: Should be "xlnx,axi-dma-1.00.a"
>  - #dma-cells: Should be <1>, see "dmas" property below
>  - reg: Should contain DMA registers location and length.
> -- dma-channel child node: Should have atleast one channel and can have upto
> +- dma-channel child node: Should have at least one channel and can have up to
>   two channels per device. This node specifies the properties of each
>   DMA channel (see child node properties below).
>  
> --
> 2.8.0
>
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 12/41] Documentation: dt: input: fix spelling mistakes

Rob Herring-3
In reply to this post by Eric Engestrom-2
On Mon, Apr 25, 2016 at 01:24:09AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <[hidden email]>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/input/ads7846.txt                  | 2 +-
>  Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
> index c6cfe2e..9fc47b0 100644
> --- a/Documentation/devicetree/bindings/input/ads7846.txt
> +++ b/Documentation/devicetree/bindings/input/ads7846.txt
> @@ -29,7 +29,7 @@ Optional properties:
>   ti,vref-delay-usecs vref supply delay in usecs, 0 for
>   external vref (u16).
>   ti,vref-mv The VREF voltage, in millivolts (u16).
> - Set to 0 to use internal refernce
> + Set to 0 to use internal references
>   (ADS7846).
>   ti,keep-vref-on set to keep vref on for differential
>   measurements as well
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> index cdf05f9..abfcab3 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> @@ -15,7 +15,7 @@ Optional properties:
>   - fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
>   - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
>     between 1 and 4096. It is the ratio between the internal reference voltage
> -   and the measured voltage after the plate was precharged. Resistence between
> +   and the measured voltage after the plate was precharged. Resistance between
>     plates and therefore the voltage decreases with pressure so that a smaller
>     value is equivalent to a higher pressure.
>   - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
> --
> 2.8.0
>
12345