[PATCH 00/41] Documentation: fix spelling mistakes

classic Classic list List threaded Threaded
93 messages Options
12345
Reply | Threaded
Open this post in threaded view
|

[PATCH 00/41] Documentation: fix spelling mistakes

Eric Engestrom-2
The following typos and other spelling mistakes were mostly found using
`codespell` [1], and the rest was found using vim's `spell` check.

I left out a bunch of "thru" -> "through", thinking it could just be
seen as regional preference (US vs UK). Should I send those as well?

Those patches can be applied independently (obviously), so there is
no need to wait for the whole series to be ack'ed.

Cheers,
  Eric

[1] https://github.com/lucasdemarchi/codespell


Eric Engestrom (41):
  Documentation: debugfs: fix spelling mistake
  Documentation: sysfs: fix spelling mistakes
  Documentation: arm: fix spelling mistakes
  Documentation: cgroup: fix spelling mistakes
  Documentation: cpu-hotplug: fix spelling mistake
  Documentation: device-mapper: fix spelling mistakes
  Documentation: dt: arc: fix spelling mistakes
  Documentation: dt: arm: fix spelling mistakes
  Documentation: dt: clock: fix spelling mistakes
  Documentation: dt: display: fix spelling mistake
  Documentation: dt: dma: fix spelling mistake
  Documentation: dt: input: fix spelling mistakes
  Documentation: dt: interrupt-controller: fix spelling mistakes
  Documentation: dt: media: fix spelling mistake
  Documentation: dt: mfd: fix spelling mistakes
  Documentation: dt: mmc: fix spelling mistake
  Documentation: dt: mtd: fix spelling mistake
  Documentation: dt: net: fix spelling mistakes
  Documentation: dt: opp: fix spelling mistake
  Documentation: dt: pinctrl: fix spelling mistake
  Documentation: dt: power: fix spelling mistake
  Documentation: dt: soc: fix spelling mistakes
  Documentation: DocBook: fix spelling mistake
  Documentation: fb: fix spelling mistakes
  Documentation: filesystems: fix spelling mistakes
  Documentation: kasan: fix spelling mistake
  Documentation: laptops: fix spelling mistake
  Documentation: locking: fix spelling mistakes
  Documentation: lzo: fix spelling mistakes
  Documentation: networking: fix spelling mistakes
  Documentation: power: fix spelling mistake
  Documentation: pps: fix spelling mistake
  Documentation: RCU: fix spelling mistake
  Documentation: robust-futexes: fix spelling mistakes
  Documentation: scsi: fix spelling mistakes
  Documentation: sound: fix spelling mistakes
  Documentation: video4linux: fix spelling mistakes
  Documentation: virtual: fix spelling mistake
  Documentation: vm: fix spelling mistakes
  Documentation: x86: fix spelling mistakes
  Documentation: xillybus: fix spelling mistake

 Documentation/ABI/testing/debugfs-driver-genwqe          |  2 +-
 .../ABI/testing/sysfs-bus-coresight-devices-etm4x        |  2 +-
 .../ABI/testing/sysfs-bus-event_source-devices-events    |  4 ++--
 .../ABI/testing/sysfs-bus-event_source-devices-hv_24x7   |  2 +-
 Documentation/ABI/testing/sysfs-driver-tegra-fuse        |  2 +-
 Documentation/ABI/testing/sysfs-fs-xfs                   |  2 +-
 Documentation/DocBook/media/dvb/net.xml                  |  2 +-
 Documentation/RCU/stallwarn.txt                          |  2 +-
 Documentation/arm/Atmel/README                           |  2 +-
 Documentation/arm/keystone/knav-qmss.txt                 |  2 +-
 Documentation/cgroup-v2.txt                              | 16 ++++++++--------
 Documentation/cpu-hotplug.txt                            |  2 +-
 Documentation/device-mapper/cache-policies.txt           |  4 ++--
 Documentation/device-mapper/statistics.txt               |  2 +-
 Documentation/devicetree/bindings/arc/archs-pct.txt      |  2 +-
 Documentation/devicetree/bindings/arc/pct.txt            |  2 +-
 Documentation/devicetree/bindings/arm/cci.txt            |  2 +-
 Documentation/devicetree/bindings/arm/spear-misc.txt     |  2 +-
 .../devicetree/bindings/clock/rockchip,rk3188-cru.txt    |  2 +-
 .../devicetree/bindings/clock/rockchip,rk3288-cru.txt    |  2 +-
 Documentation/devicetree/bindings/clock/st/st,clkgen.txt |  2 +-
 .../devicetree/bindings/display/exynos/exynos_dsim.txt   |  2 +-
 .../devicetree/bindings/dma/xilinx/xilinx_dma.txt        |  2 +-
 Documentation/devicetree/bindings/input/ads7846.txt      |  2 +-
 .../bindings/input/touchscreen/fsl-mx25-tcq.txt          |  2 +-
 .../bindings/interrupt-controller/ti,omap4-wugen-mpu     |  4 ++--
 Documentation/devicetree/bindings/media/xilinx/video.txt |  2 +-
 Documentation/devicetree/bindings/mfd/qcom-rpm.txt       |  4 ++--
 .../devicetree/bindings/mmc/mmc-pwrseq-emmc.txt          |  2 +-
 Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt  |  2 +-
 .../devicetree/bindings/net/hisilicon-hns-nic.txt        |  2 +-
 Documentation/devicetree/bindings/net/stmmac.txt         |  4 ++--
 Documentation/devicetree/bindings/net/ti,dp83867.txt     |  2 +-
 Documentation/devicetree/bindings/opp/opp.txt            |  2 +-
 .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt       |  2 +-
 .../devicetree/bindings/power/qcom,coincell-charger.txt  |  2 +-
 .../bindings/soc/ti/keystone-navigator-qmss.txt          |  6 +++---
 Documentation/fb/udlfb.txt                               |  6 +++---
 Documentation/filesystems/autofs4.txt                    |  6 +++---
 Documentation/filesystems/cifs/CHANGES                   |  2 +-
 Documentation/filesystems/proc.txt                       |  4 ++--
 Documentation/filesystems/vfs.txt                        |  2 +-
 Documentation/kasan.txt                                  |  2 +-
 Documentation/laptops/toshiba_haps.txt                   |  2 +-
 Documentation/locking/lockdep-design.txt                 |  4 ++--
 Documentation/lzo.txt                                    |  4 ++--
 Documentation/networking/altera_tse.txt                  |  6 +++---
 Documentation/networking/ipvlan.txt                      |  6 +++---
 Documentation/networking/pktgen.txt                      |  6 +++---
 Documentation/networking/vrf.txt                         |  2 +-
 Documentation/networking/xfrm_sync.txt                   |  6 +++---
 Documentation/power/opp.txt                              |  2 +-
 Documentation/pps/pps.txt                                |  2 +-
 Documentation/robust-futexes.txt                         |  6 +++---
 Documentation/scsi/ChangeLog.megaraid_sas                | 16 ++++++++--------
 Documentation/sound/alsa/compress_offload.txt            |  2 +-
 Documentation/sound/alsa/soc/dapm.txt                    |  2 +-
 Documentation/sound/alsa/soc/overview.txt                |  2 +-
 Documentation/video4linux/vivid.txt                      |  6 +++---
 Documentation/virtual/kvm/devices/s390_flic.txt          |  2 +-
 Documentation/vm/transhuge.txt                           |  6 +++---
 Documentation/x86/intel_mpx.txt                          |  4 ++--
 Documentation/xillybus.txt                               |  2 +-
 63 files changed, 106 insertions(+), 106 deletions(-)

--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 01/41] Documentation: debugfs: fix spelling mistake

Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/ABI/testing/debugfs-driver-genwqe | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/debugfs-driver-genwqe b/Documentation/ABI/testing/debugfs-driver-genwqe
index 1c2f256..b45b016 100644
--- a/Documentation/ABI/testing/debugfs-driver-genwqe
+++ b/Documentation/ABI/testing/debugfs-driver-genwqe
@@ -31,7 +31,7 @@ What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_regs
 Date:           Oct 2013
 Contact:        [hidden email]
 Description:    Dump of the error registers before the last reset of
-                the card occured.
+                the card occurred.
                 Only available for PF.
 
 What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid0
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 02/41] Documentation: sysfs: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x      | 2 +-
 Documentation/ABI/testing/sysfs-bus-event_source-devices-events  | 4 ++--
 Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 | 2 +-
 Documentation/ABI/testing/sysfs-driver-tegra-fuse                | 2 +-
 Documentation/ABI/testing/sysfs-fs-xfs                           | 2 +-
 5 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
index 2355ed8..19b83f4 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -378,7 +378,7 @@ Date: April 2015
 KernelVersion: 4.01
 Contact: Mathieu Poirier <[hidden email]>
 Description: (R) Returns the maximum size of the data value, data address,
- VMID, context ID and instuction address in the trace unit
+ VMID, context ID and instruction address in the trace unit
  (0x1E8).  The value is taken directly from the HW.
 
 What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr3
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
index 505f080..77de58d 100644
--- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
@@ -47,7 +47,7 @@ Description: Per-pmu performance monitoring events specific to the running syste
  If a <term> is specified alone (without an assigned value), it
  is implied that 0x1 is assigned to that <term>.
 
- Examples (each of these lines would be in a seperate file):
+ Examples (each of these lines would be in a separate file):
 
  event=0x2abc
  event=0x423,inv,cmask=0x3
@@ -83,7 +83,7 @@ Description: Perf event scaling factors
 
  A string representing a floating point value expressed in
  scientific notation to be multiplied by the event count
- recieved from the kernel to match the unit specified in the
+ received from the kernel to match the unit specified in the
  <event>.unit file.
 
  Example:
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
index f893337..ec27c6c 100644
--- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
@@ -4,7 +4,7 @@ Contact: Linux on PowerPC Developer List <[hidden email]>
 Description:
  Provides access to the binary "24x7 catalog" provided by the
  hypervisor on POWER7 and 8 systems. This catalog lists events
- avaliable from the powerpc "hv_24x7" pmu. Its format is
+ available from the powerpc "hv_24x7" pmu. Its format is
  documented here:
  https://raw.githubusercontent.com/jmesmon/catalog-24x7/master/hv-24x7-catalog.h
 
diff --git a/Documentation/ABI/testing/sysfs-driver-tegra-fuse b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
index 69f5af6..b8936fa 100644
--- a/Documentation/ABI/testing/sysfs-driver-tegra-fuse
+++ b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
@@ -3,7 +3,7 @@ Date: February 2014
 Contact: Peter De Schrijver <[hidden email]>
 Description: read-only access to the efuses on Tegra20, Tegra30, Tegra114
  and Tegra124 SoC's from NVIDIA. The efuses contain write once
- data programmed at the factory. The data is layed out in 32bit
+ data programmed at the factory. The data is laid out in 32bit
  words in LSB first format. Each bit represents a single value
  as decoded from the fuse registers. Bits order/assignment
  exactly matches the HW registers, including any unused bits.
diff --git a/Documentation/ABI/testing/sysfs-fs-xfs b/Documentation/ABI/testing/sysfs-fs-xfs
index ea0cc8c..f704925 100644
--- a/Documentation/ABI/testing/sysfs-fs-xfs
+++ b/Documentation/ABI/testing/sysfs-fs-xfs
@@ -33,7 +33,7 @@ Contact: [hidden email]
 Description:
  The current state of the log write grant head. It
  represents the total log reservation of all currently
- oustanding transactions, including regrants due to
+ outstanding transactions, including regrants due to
  rolling transactions. The grant head is exported in
  "cycle:bytes" format.
 Users: xfstests
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 03/41] Documentation: arm: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/arm/Atmel/README           | 2 +-
 Documentation/arm/keystone/knav-qmss.txt | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/arm/Atmel/README b/Documentation/arm/Atmel/README
index 0931cf7..adffac7 100644
--- a/Documentation/arm/Atmel/README
+++ b/Documentation/arm/Atmel/README
@@ -16,7 +16,7 @@ git branches/tags and email subject always contain this "at91" sub-string.
 
 AT91 SoCs
 ---------
-Documentation and detailled datasheet for each product are available on
+Documentation and detailed datasheet for each product are available on
 the Atmel website: http://www.atmel.com.
 
   Flavors:
diff --git a/Documentation/arm/keystone/knav-qmss.txt b/Documentation/arm/keystone/knav-qmss.txt
index fcdb9fd..d15bf9a 100644
--- a/Documentation/arm/keystone/knav-qmss.txt
+++ b/Documentation/arm/keystone/knav-qmss.txt
@@ -36,7 +36,7 @@ accumulator channels defined in DTS (example in DT documentation) to monitor
 CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at
  git://git.ti.com/keystone-rtos/qmss-lld.git
 
-k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
+k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports up to 48 accumulator
 channels. This firmware is available under ti-keystone folder of
 firmware.git at
    git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 04/41] Documentation: cgroup: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/cgroup-v2.txt | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt
index 4cc07ce..c836b69 100644
--- a/Documentation/cgroup-v2.txt
+++ b/Documentation/cgroup-v2.txt
@@ -422,7 +422,7 @@ and is an example of this type.
 
 3-2. Limits
 
-A child can only consume upto the configured amount of the resource.
+A child can only consume up to the configured amount of the resource.
 Limits can be over-committed - the sum of the limits of children can
 exceed the amount of resource available to the parent.
 
@@ -438,11 +438,11 @@ on an IO device and is an example of this type.
 
 3-3. Protections
 
-A cgroup is protected to be allocated upto the configured amount of
+A cgroup is protected to be allocated up to the configured amount of
 the resource if the usages of all its ancestors are under their
 protected levels.  Protections can be hard guarantees or best effort
 soft boundaries.  Protections can also be over-committed in which case
-only upto the amount available to the parent is protected among
+only up to the amount available to the parent is protected among
 children.
 
 Protections are in the range [0, max] and defaults to 0, which is
@@ -694,7 +694,7 @@ All time durations are in microseconds.
 
   $MAX $PERIOD
 
- which indicates that the group may consume upto $MAX in each
+ which indicates that the group may consume up to $MAX in each
  $PERIOD duration.  "max" for $MAX indicates no limit.  If only
  one number is written, $MAX is updated.
 
@@ -713,7 +713,7 @@ All time durations are in microseconds.
 
   $MAX $PERIOD
 
- which indicates that the group may consume upto $MAX in each
+ which indicates that the group may consume up to $MAX in each
  $PERIOD duration.  If only one number is written, $MAX is
  updated.
 
@@ -923,7 +923,7 @@ PAGE_SIZE multiple when read back.
  cgroups.  The default is "max".
 
  Swap usage hard limit.  If a cgroup's swap usage reaches this
- limit, anonymous meomry of the cgroup will not be swapped out.
+ limit, anonymous memory of the cgroup will not be swapped out.
 
 
 5-2-2. Usage Guidelines
@@ -1123,7 +1123,7 @@ writeback as follows.
 
 6-1. Basics
 
-cgroup namespace provides a mechanism to virtualize the view of the
+cgroup namespace provides a mechanism to virtualise the view of the
 "/proc/$PID/cgroup" file and cgroup mounts.  The CLONE_NEWCGROUP clone
 flag can be used with clone(2) and unshare(2) to create a new cgroup
 namespace.  The process running inside the cgroup namespace will have
@@ -1256,7 +1256,7 @@ This will mount the unified cgroup hierarchy with cgroupns root as the
 filesystem root.  The process needs CAP_SYS_ADMIN against its user and
 mount namespaces.
 
-The virtualization of /proc/self/cgroup file combined with restricting
+The virtualisation of /proc/self/cgroup file combined with restricting
 the view of cgroup hierarchy by namespace-private cgroupfs mount
 provides a properly isolated cgroup view inside the container.
 
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 05/41] Documentation: cpu-hotplug: fix spelling mistake

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/cpu-hotplug.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index dd68821..12e0b8f 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -97,7 +97,7 @@ from the map depending on the event is hot-add/hot-remove. There are currently
 no locking rules as of now. Typical usage is to init topology during boot,
 at which time hotplug is disabled.
 
-You really dont need to manipulate any of the system cpu maps. They should
+You really don't need to manipulate any of the system cpu maps. They should
 be read-only for most use. When setting up per-cpu resources almost always use
 cpu_possible_mask/for_each_possible_cpu() to iterate.
 
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 06/41] Documentation: device-mapper: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/device-mapper/cache-policies.txt | 4 ++--
 Documentation/device-mapper/statistics.txt     | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/device-mapper/cache-policies.txt b/Documentation/device-mapper/cache-policies.txt
index e5062ad..e3a2063 100644
--- a/Documentation/device-mapper/cache-policies.txt
+++ b/Documentation/device-mapper/cache-policies.txt
@@ -11,7 +11,7 @@ Every bio that is mapped by the target is referred to the policy.
 The policy can return a simple HIT or MISS or issue a migration.
 
 Currently there's no way for the policy to issue background work,
-e.g. to start writing back dirty blocks that are going to be evicte
+e.g. to start writing back dirty blocks that are going to be evicted
 soon.
 
 Because we map bios, rather than requests it's easy for the policy
@@ -67,7 +67,7 @@ the entries (each hotspot block covers a larger area than a single
 cache block).
 
 All these mean smq uses ~25bytes per cache block.  Still a lot of
-memory, but a substantial improvement nontheless.
+memory, but a substantial improvement nonetheless.
 
 Level balancing:
 MQ places entries in different levels of the multiqueue structures
diff --git a/Documentation/device-mapper/statistics.txt b/Documentation/device-mapper/statistics.txt
index 6f5ef94..170ac02 100644
--- a/Documentation/device-mapper/statistics.txt
+++ b/Documentation/device-mapper/statistics.txt
@@ -205,7 +205,7 @@ statistics on them:
 
   dmsetup message vol 0 @stats_create - /100
 
-Set the auxillary data string to "foo bar baz" (the escape for each
+Set the auxiliary data string to "foo bar baz" (the escape for each
 space must also be escaped, otherwise the shell will consume them):
 
   dmsetup message vol 0 @stats_set_aux 0 foo\\ bar\\ baz
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 07/41] Documentation: dt: arc: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/arc/archs-pct.txt | 2 +-
 Documentation/devicetree/bindings/arc/pct.txt       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt
index 1ae98b87..e4b9dce 100644
--- a/Documentation/devicetree/bindings/arc/archs-pct.txt
+++ b/Documentation/devicetree/bindings/arc/archs-pct.txt
@@ -2,7 +2,7 @@
 
 The ARC HS can be configured with a pipeline performance monitor for counting
 CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to upto 32 counters.
+are 100+ hardware conditions dynamically mapped to up to 32 counters.
 It also supports overflow interrupts.
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/arc/pct.txt b/Documentation/devicetree/bindings/arc/pct.txt
index 7b95884..4e874d9 100644
--- a/Documentation/devicetree/bindings/arc/pct.txt
+++ b/Documentation/devicetree/bindings/arc/pct.txt
@@ -2,7 +2,7 @@
 
 The ARC700 can be configured with a pipeline performance monitor for counting
 CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to upto 32 counters
+are 100+ hardware conditions dynamically mapped to up to 32 counters
 
 Note that:
  * The ARC 700 PCT does not support interrupts; although HW events may be
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 08/41] Documentation: dt: arm: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/arm/cci.txt        | 2 +-
 Documentation/devicetree/bindings/arm/spear-misc.txt | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
index a1a5a7e..0f2153e 100644
--- a/Documentation/devicetree/bindings/arm/cci.txt
+++ b/Documentation/devicetree/bindings/arm/cci.txt
@@ -100,7 +100,7 @@ specific to ARM.
  "arm,cci-400-pmu,r0"
  "arm,cci-400-pmu,r1"
  "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
-      secure acces to CCI registers
+      secure access to CCI registers
  "arm,cci-500-pmu,r0"
  "arm,cci-550-pmu,r0"
  - reg:
diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt
index cf64982..e404e25 100644
--- a/Documentation/devicetree/bindings/arm/spear-misc.txt
+++ b/Documentation/devicetree/bindings/arm/spear-misc.txt
@@ -6,4 +6,4 @@ few properties of different peripheral controllers.
 misc node required properties:
 
 - compatible Should be "st,spear1340-misc", "syscon".
-- reg: Address range of misc space upto 8K
+- reg: Address range of misc space up to 8K
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 09/41] Documentation: dt: clock: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt | 2 +-
 Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt | 2 +-
 Documentation/devicetree/bindings/clock/st/st,clkgen.txt        | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
index 0c2bf5e..7f36853 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
@@ -16,7 +16,7 @@ Required Properties:
 Optional Properties:
 
 - rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changable, due to the missing pll lock status.
+  If missing pll rates are not changeable, due to the missing pll lock status.
 
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. All available clocks are defined as
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
index c9fbb76..8cb47c3 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
@@ -15,7 +15,7 @@ Required Properties:
 Optional Properties:
 
 - rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changable, due to the missing pll lock status.
+  If missing pll rates are not changeable, due to the missing pll lock status.
 
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. All available clocks are defined as
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 78978f1..426bdda 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -40,7 +40,7 @@ address is common of all subnode.
  };
 
 This binding uses the common clock binding[1].
-Each subnode should use the binding discribe in [2]..[7]
+Each subnode should use the binding describe in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 10/41] Documentation: dt: display: fix spelling mistake

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index 22756b3..a782659 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -41,7 +41,7 @@ Video interfaces:
   endpoint node connected from mic node (reg = 0):
     - remote-endpoint: specifies the endpoint in mic node. This node is required
        for Exynos5433 mipi dsi. So mic can access to panel node
-       thoughout this dsi node.
+       throughout this dsi node.
   endpoint node connected to panel node (reg = 1):
     - remote-endpoint: specifies the endpoint in panel node. This node is
        required in all kinds of exynos mipi dsi to represent
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 11/41] Documentation: dt: dma: fix spelling mistake

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 2291c40..3cf0072d 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -7,7 +7,7 @@ Required properties:
 - compatible: Should be "xlnx,axi-dma-1.00.a"
 - #dma-cells: Should be <1>, see "dmas" property below
 - reg: Should contain DMA registers location and length.
-- dma-channel child node: Should have atleast one channel and can have upto
+- dma-channel child node: Should have at least one channel and can have up to
  two channels per device. This node specifies the properties of each
  DMA channel (see child node properties below).
 
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 12/41] Documentation: dt: input: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/input/ads7846.txt                  | 2 +-
 Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
index c6cfe2e..9fc47b0 100644
--- a/Documentation/devicetree/bindings/input/ads7846.txt
+++ b/Documentation/devicetree/bindings/input/ads7846.txt
@@ -29,7 +29,7 @@ Optional properties:
  ti,vref-delay-usecs vref supply delay in usecs, 0 for
  external vref (u16).
  ti,vref-mv The VREF voltage, in millivolts (u16).
- Set to 0 to use internal refernce
+ Set to 0 to use internal references
  (ADS7846).
  ti,keep-vref-on set to keep vref on for differential
  measurements as well
diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
index cdf05f9..abfcab3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
@@ -15,7 +15,7 @@ Optional properties:
  - fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
  - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
    between 1 and 4096. It is the ratio between the internal reference voltage
-   and the measured voltage after the plate was precharged. Resistence between
+   and the measured voltage after the plate was precharged. Resistance between
    plates and therefore the voltage decreases with pressure so that a smaller
    value is equivalent to a higher pressure.
  - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 13/41] Documentation: dt: interrupt-controller: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 .../devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu       | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
index 43effa0..18d4f40 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
@@ -4,7 +4,7 @@ All TI OMAP4/5 (and their derivatives) an interrupt controller that
 routes interrupts to the GIC, and also serves as a wakeup source. It
 is also referred to as "WUGEN-MPU", hence the name of the binding.
 
-Reguired properties:
+Required properties:
 
 - compatible : should contain at least "ti,omap4-wugen-mpu" or
   "ti,omap5-wugen-mpu"
@@ -20,7 +20,7 @@ Notes:
 - Because this HW ultimately routes interrupts to the GIC, the
   interrupt specifier must be that of the GIC.
 - Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
-  are explicitly forbiden.
+  are explicitly forbidden.
 
 Example:
 
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 14/41] Documentation: dt: media: fix spelling mistake

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/media/xilinx/video.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/xilinx/video.txt b/Documentation/devicetree/bindings/media/xilinx/video.txt
index cbd46fa..68ac210 100644
--- a/Documentation/devicetree/bindings/media/xilinx/video.txt
+++ b/Documentation/devicetree/bindings/media/xilinx/video.txt
@@ -20,7 +20,7 @@ The following properties are common to all Xilinx video IP cores.
 - xlnx,video-format: This property represents a video format transmitted on an
   AXI bus between video IP cores, using its VF code as defined in "AXI4-Stream
   Video IP and System Design Guide" [UG934]. How the format relates to the IP
-  core is decribed in the IP core bindings documentation.
+  core is described in the IP core bindings documentation.
 
 - xlnx,video-width: This property qualifies the video format with the sample
   width expressed as a number of bits per pixel component. All components must
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 15/41] Documentation: dt: mfd: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 5e97a95..b98b291 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -178,7 +178,7 @@ see regulator.txt - with additional custom properties described below:
 - qcom,force-mode:
  Usage: optional (default if no other qcom,force-mode is specified)
  Value type: <u32>
- Defintion: indicates that the regulator should be forced to a
+ Definition: indicates that the regulator should be forced to a
    particular mode, valid values are:
    QCOM_RPM_FORCE_MODE_NONE - do not force any mode
    QCOM_RPM_FORCE_MODE_LPM - force into low power mode
@@ -204,7 +204,7 @@ see regulator.txt - with additional custom properties described below:
 - qcom,force-mode:
  Usage: optional
  Value type: <u32>
- Defintion: indicates that the regulator should not be forced to any
+ Definition: indicates that the regulator should not be forced to any
    particular mode, valid values are:
    QCOM_RPM_FORCE_MODE_NONE - do not force any mode
    QCOM_RPM_FORCE_MODE_LPM - force into low power mode
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 16/41] Documentation: dt: mmc: fix spelling mistake

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
index 0cb827b..3d965d5 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
@@ -1,7 +1,7 @@
 * The simple eMMC hardware reset provider
 
 The purpose of this driver is to perform standard eMMC hw reset
-procedure, as descibed by Jedec 4.4 specification. This procedure is
+procedure, as described by Jedec 4.4 specification. This procedure is
 performed just after MMC core enabled power to the given mmc host (to
 fix possible issues if bootloader has left eMMC card in initialized or
 unknown state), and before performing complete system reboot (also in
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 17/41] Documentation: dt: mtd: fix spelling mistake

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index c2546ce..0f6985b 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -52,7 +52,7 @@ Optional properties:
                               v7.0. Use this property to describe the rare
                               earlier versions of this core that include WP
 
- -- Additonal SoC-specific NAND controller properties --
+ -- Additional SoC-specific NAND controller properties --
 
 The NAND controller is integrated differently on the variety of SoCs on which it
 is found. Part of this integration involves providing status and enable bits
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 18/41] Documentation: dt: net: fix spelling mistakes

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt | 2 +-
 Documentation/devicetree/bindings/net/stmmac.txt            | 4 ++--
 Documentation/devicetree/bindings/net/ti,dp83867.txt        | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
index e6a9d1c..e911a63 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
@@ -8,7 +8,7 @@ Required properties:
   specifies a reference to the associating hardware driver node.
   see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
 - port-id: is the index of port provided by DSAF (the accelerator). DSAF can
-  connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They
+  connect to 8 PHYs. Port 0 to 1 are both used for administration purpose. They
   are called debug ports.
 
   The remaining 6 PHYs are taken according to the mode of DSAF.
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 6605d19..9651dfd 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -51,8 +51,8 @@ Optional properties:
    AXI register inside the DMA module:
  - snps,lpi_en: enable Low Power Interface
  - snps,xit_frm: unlock on WoL
- - snps,wr_osr_lmt: max write oustanding req. limit
- - snps,rd_osr_lmt: max read oustanding req. limit
+ - snps,wr_osr_lmt: max write outstanding req. limit
+ - snps,rd_osr_lmt: max read outstanding req. limit
  - snps,kbbe: do not cross 1KiB boundary.
  - snps,axi_all: align address
  - snps,blen: this is a vector of supported burst length.
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index 58d935b..5d21141 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -2,7 +2,7 @@
 
 Required properties:
  - reg - The ID number for the phy, usually a small integer
- - ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h
+ - ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
  for applicable values
  - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
  for applicable values
--
2.8.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 19/41] Documentation: dt: opp: fix spelling mistake

Eric Engestrom-2
In reply to this post by Eric Engestrom-2
Signed-off-by: Eric Engestrom <[hidden email]>
---
 Documentation/devicetree/bindings/opp/opp.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 601256f..ee91cbd 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -45,7 +45,7 @@ Devices supporting OPPs must set their "operating-points-v2" property with
 phandle to a OPP table in their DT node. The OPP core will use this phandle to
 find the operating points for the device.
 
-If required, this can be extended for SoC vendor specfic bindings. Such bindings
+If required, this can be extended for SoC vendor specific bindings. Such bindings
 should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
 and should have a compatible description like: "operating-points-v2-<vendor>".
 
--
2.8.0

12345